How to Protect Hair From Heat Styling Damage

Table of Contents

    It happens to all of us, where we complete blow-drying our hair or curling our hair to perfection. However, with time, the side effect becomes visible in the form of split ends and lack of natural shine.

    It is through preparation that you will get perfect hair through your hair styling techniques. It is not necessary that you give up on all your hair styling techniques and tools for getting perfect hair. With an understanding of heat and by making some minor modifications to your schedule, you will be able to have it all.

    What Actually Happens When You Apply Heat?

    It is important to know what happens to your hair when you apply heat to it. The cuticle is a protective layer made up of scales on each hair fiber. Consider the cuticle to be shingles of a roof. When hair is healthy, the shingles lay flat, thereby safeguarding moisture in the hair shafts and giving reflection of light.

    After exposure to excessive heat:

    • The moisture is gone: The natural moisture contained in the hair disappears too soon.
    • The cuticle lifts: The shingles that act as the protection to your hair stand up and leave the sensitive inner core of the hair open.
    • Proteins break down: The molecules that provide strength and elasticity to your hair are distorted due to stretching.

    The hair pores become open after the lifting of the cuticle layer and evaporation of moisture from the hair. This causes the hair to become porous and able to absorb moisture easily. Consequently, it ends up being dry and lifeless.

    1. The Prep Work: Foundation of Heat Protection

    Hair protection begins way before you plug in your straightener. Everything about how well your hair holds up when heated depends on what you do in the shower.

    Moisturizing in the Shower

    Dried hair gets damaged more easily than moisturized hair. You should look out for products that have deep moisturizing properties. Shea butter, argan oil, and glycerin are some great ingredients that provide the hair with a protective coat and a layer of moisture. You must always apply conditioner and concentrate on your mid-lengths to the ends of your hair.

    The Magic of Heat Protection Sprays

    When it comes to styling your hair, there is only one message we hope you get across from reading this guide: don't ever use hot tools on your hair without proper heat protection.

    Heat protection sprays serve as a physical barrier between the hot metal and your precious locks. The active ingredients of the sprays are excellent conductors of heat. Therefore, it will gradually raise the temperature of your hair strands instead of causing a sharp shock. Besides that, they seal the hair cuticle to lock in moisture into the hair.

    Types of protection:

    • Spray: Ideal for those who have fine and thin hair due to the light formulation of the product that will not weigh down hair.
    • Creams or Serums: Great for those who have thick, coarsely-textured or curly hair because this will be another layer of moisturization.

    Application tips: Separate the hair and then apply the spray as well as cream down to its ends. Brush out the product using a wide-toothed comb.

    2. The Drying Phase: Slow and Steady

    One such mistake that people often make is going straight from the shower to the styling tools. It is extremely damaging for the hair to style them while they are wet.

    Styling Wet Hair

    If your hair is wet, then it is the most delicate state of your hair. If you use flat or curling irons on your wet or damp hair, then the water in your hair will boil. You can hear a hissing sound or steam coming out, this means that the water in your hair is boiling instantly, causing small bubbles to form in your hair follicles and break them from the inside out.

    Air Dry First 

    Let your hair dry naturally through air drying before you even think of using any heating tools. It is recommended that at least 70% - 80% of your hair is naturally dried before you can pick up the blow dryer. If you intend to straighten it with the help of flat iron or curling iron, 100% drying is essential.

    Towel Blotting Not Towel Rubbing

    Once you step out of the bathroom, don’t harshly rub your wet hair with cotton towels. This is because the friction from the fibers on your hair will make the cuticles appear rough. In case you want to dry off your hair without having any friction, then use a microfiber cloth or a worn-out T-shirt made of cotton.

    3. Upgrading and Using Your Tools Wisely

    It should be noted that all styling tools are not made equally. Using quality tools and using them at proper settings will prevent serious damage to your hair in the future.

    Look for Adjustable Temperature Settings

    Poor quality tools always work on just one setting, that is, ON. In this case, the tool reaches the highest possible temperature, which is not good for most hair types. Always seek styling tools with a digital temperature display or dial.

    Pick Suitable Materials for Plates or Barrel

    Materials used for straightening plates or curling irons barrels play a crucial role:

    • Ceramic: Ensures even distribution of heat in your hair and works as the internal heating mechanism. It is recommended for fine, thin or average hair types.
    • Tourmaline: Coating of stones that produce negative ions. Such coating smooths out the hair cuticles and increases shine.
    • Titanium: Heats up very quickly, but maintains a high temperature as well. This material works very effectively but heats up a lot and is recommended for thick, coarse hair. Do not use titanium plates for fine and damaged hair.

    Temperature Adjustment according to Hair Type

    There is no standard “ideal” temperature for hair styling. You have to adjust the temperature according to your hair type:

    • Fine, Thin or Dyed Hair: Normally the temperature has to be set between 120°C to 150°C. Because good hair damages too quickly even with the light heat, it is essential to keep the temperature low.
    • Average Density of Hair: Usually the temperature has to be somewhere between 150°C to 180°C. Adequate amount of heat should be needed for styling your hair.
    • Coarse or Curly Hair:  Generally, the temperature can range up from about 180°C to 200°C. The major cause behind this is that curly hair possesses thick shafts, which need energy to change the shape of your hair. It is advisable not to raise the temperature near 200°C or even beyond that as this high heat damages your hair forever.

    4. Master Your Styling Technique

    How you physically treat your hot tools has a huge impact on how you avoid heat damage. Simply making some minor changes in your routine can make an enormous difference in the stress that you put on your hair.

    One-Pass Rule

    Whenever you use a flat iron, try your best to move the tool down the section of hair just once. Passing a hot iron back and forth over the same area of hair three, four, or even five times means that you are cooking the hair. In case you have to pass the tool several times over the hair, it either means that the sections are too thick or your temperature is just a little bit too low.

    Do Not Stop Moving the Tool

    It is always advisable not to leave either a flat iron or a curling iron at one single point on your hair for an extended amount of time. Always remember to glide your flat iron from root to tip. If you are using a curling iron, wait for about three or five seconds and then let go of the curl.

    Work on Small and Clean Sections

    Although it seems like it would be easier to work on big hair sections at once, this will only cause more harm than good. When the sections are larger, the heat will be able to reach only the outer parts of the strands, leaving the inner strands untouched. This means you will have to repeat the procedure of styling your hair. The best thing for you would be to divide the hair into smaller sections so that the heat is evenly distributed.

    Use the Nozzle on Your Blow Dryer

    The nozzle on your blow dryer is not optional but rather necessary. It is named the concentrator nozzle for a reason it does two important things. Firstly, it makes sure that the raw heat element of your blow dryer will not come into direct contact with your hair. Secondly, it directs airflow to travel down the hair fiber. It will flatten the cuticle, giving it a smooth and shiny look.

    5. The Off-Days: Recovery and Maintenance

    Your hair will not withstand constant heat application without showing signs of exhaustion one day or another. You should take care of your hair and allow your hair to rest for its best health.

    Use Heat-Free Techniques

    Allow your hair to have some days off from heat application every week by utilizing heat-free styling methods:

    • Nighttime braiding: Create braids in wet hair for beachy waves upon waking up.
    • Rollers without heat: Hair that is moist can be put in rolls that have either been stained or foamed overnight to create nice springy curls.
    • Stylish buns or Ponytails: Using leave-on conditioner or oils, the hair can be made into either a stylish bun or a ponytail style.

    Deep conditioning every week

    Just applying the conditioners will not be sufficient when you have a habit of using the heating instruments on your hair on a daily basis. Instead, get a treatment that owns oil and fatty acid content. It has to be applied on your for 15 to 30 minutes once every week.

    Add Hair Oils

    Add a bit of light hair oil such as jojoba, argan or sweet almond oil to your hair. The oil normally acts as a barrier on your hair, tries to protect it from any external humidity as well as prevents any moisture content inside your body. This also helps to provide a shiny texture to your hair.

    Trimming is Inevitable

    Once the hair strand gets split at its tip, it becomes impossible to repair. There is nothing that can be done to stick the split hair again. Otherwise, the damage continues up to the root of the hair strand and eventually breaks your hair. Visit your hairstylist after every 6 to 8 weeks for trimming your hair a little bit.

    Summary Checklist for Daily Styling

    In order to make the process easier to memorize, remember the following short list every time you style:

    • Wash: Use moisturizing shampoo such as Tinfal anti hair fall shampoo and serum such as Tinfal hair regrowth serum.
    • Towel: Squeeze gently using a microfiber towel but don’t rub.
    • Protect: Apply a layer of heat protector from root to end.
    • Dry: Air dry almost to dryness and only then finish with blow-drying using a downwards facing nozzle.
    • Adjust: Set your hot tool’s temperature according to your particular hair type.
    • Style: Always work in small sections and move the hot tool consistently.
    • Finish: apply light oil on ends to seal moisture and add shine.

    These tips will assist you in changing your styling methods for your hair. You will no longer have to worry about styling with heat and end up with broken and lifeless hair. With the proper preparation and tools, you are able to style your hair in any way that you want.